Qingdao Excel Luck International Trading Co. Ltd

Model Number: Z3050*16- Key Specifications/Special Features: Maximum drilling diameter: 50mmDistance from the center line of spindle to column (max): 1600mmDistance from the center line of spindle to column (min): 350mmHorizontal traverse of spindle head on arm: 1250mmDistance from spindle nose to working surface of base plate (max): 1215mmDistance from spindle nose to working surface of base plate (min): 315mmVertical travel of arm on column: 600mm

Elevating speed of arm: 1.2m/min

Swivel angle of arm: 360°

Taper in spindle: morse 5

Range of spindle speeds: 25 ～2000r/min

Number of spindle speeds: 16steps

Range of spindle feeds: 0.04 ～3.2mm/r

Number of spindle feeds: 16 steps

Spindle travel: 315mm

Feed depth per revolution of graduated dial: 122.5mm

Maximum permissible torque of spindle: 400N·m

Maximum permissible feed pressure of spindle: 16kN

Power of the main drive motor: 4kW

Power of arm elevating motor: 1.5kW

Power of hydraulic clamping motor for spindle box, column, arm: 0.55kW

Power of coolant pump motor: 0.09kW

N.W/G.W.: 4500/4800kg

Overall dimensions (L ×W×H): 263 ×101×284cm

Standard accessory:

• Accurate hexagon nuts
• T-head bolt
• Accurate washer
• Foot screws
• Drifts
• Morse taper short reduction sleeve
• Machine oil gun
• Fixture for moulding